G8LMW Consulting stock, support and integrate YellowFin Mobile WiMAX analyser systems.
The YellowFin Mobile WiMAX analyser (802.16e) allows engineers and installers to optimize existing WiMAX Fixed networks for better coverage by including a spectrum analyzer and WiMAX packet demodulation all in one handheld unit.
WiMAX physical layer demodulation
Platform covers all WiMAX RF bands (choose model)
Proprietary RF engine can detect interference, measure true multipath and perform site survey mapping with optional software
YellowFin Mobile WiMAX Analyser
G8LMW Consulting stock, support and integrate YellowFin Mobile WiMAX analyser systems.
The YellowFin Mobile WiMAX analyser (802.16e) allows engineers and installers to optimize existing WiMAX Fixed networks for better coverage by including a spectrum analyzer and WiMAX packet demodulation all in one handheld unit.
WiMAX physical layer demodulation
Platform covers all WiMAX RF bands (choose model)
Proprietary RF engine can detect interference, measure true multipath and perform site survey mapping with optional software
The YellowFin Mobile WiMAX Analyser is the world’s first truly portable calibrated, demodulating WiMAX test receiver. This handheld unit utilizes the Samsung Q1 Ultra Premium tablet UMPC as an interface in conjunction with Berkeley’s precision receiver technology for complete spectrum analysis as well as WiMAX packet demodulation.
The YellowFin Mobile WiMAX Analyser receiver sweeps the 2.0 – 5.9 GHz spectrums to within +1.5 dB accuracy. YellowFin™ performs full spectrum analysis allowing RF engineers to see the whole wireless network picture. Features include power triggers, peak hold/search, markers and multiple waveform traces.
WiMAX 802.16e packet analysis includes RSSI measurements, Cell ID & Segment information, multipath analysis and CINR (Carrier-to-Interference-plus-Noise-Ratios) on a preamble basis. The optional DF (Direction Finding) Antenna allows engineers to pinpoint sources of WiMAX interference, rogue base stations and even nearby hackers.
An internal 12-channel/satellite GPS receiver allows for geo-coded site surveys and drive-studies using optional mapping software.
WiMAX 802.16e Packet Analysis
WiMAX Spectrum Analysis
Scans Up To 20 Samples Per Second
Measures All 114 Preambles
RF Direction Finding (using optional antenna)
True Multipath Measurements
RF Interference Detection
Peak Search / Hold with up to 4 Peak Hold waveform traces
User Selectable Power Trigger
Waveform Snapshots of any screens
CE Certification
Performs Site Survey Mapping Coverage (using optional DragNet software)
Performs Remote Monitoring and Control via Ethernet Connection (using optional YellowFin™ Remote Manager software)
| Bands Supported |
2.0 – 5.9 GHz (802.16e)
|
| Channel Bandwidths |
3.5, 5, 7, 8.75, 10 MHz
|
| RF Sensitivity (Wide Band) |
-20 to -90 dBm
|
| ID Cell & Segment | |
| RSSI (Channel) |
-20 to -80 dBm
|
| Correlated Multipath Measurements |
0 to -10 dB
|
| CINR |
0 to +20 dBm
|
| SPECTRUM ANALYZER SPECIFICATIONS: | |
| Bands Supported |
2.0 – 5.9 GHz
|
| Average Noise Floor (no input) |
< -100 dBm (reference level -70 dBm, resolution bandwidth=50 kHz)
|
| Dynamic Range |
> 40 dB
|
| Level Accuracy |
+ 1.5 dB (25º C)
|
| Max Input (safe) |
+ 0 dBm
|
| Max Input (no saturation) |
-20 dBm
|
| Reference Level |
-20 to -70 dBm (10 dB steps)
|
| TRIGGERING: | |
| User Control | Auto or Manual |
| Packet/Interefrence Trigger | Trigger analyzer when input power meets or exceeds threshold (20 MHz span) |
| Trigger Threshold | User settable in dBm |
| Trigger Delay | User settable in mS |
| GENERAL SPECIFICATIONS: | |
| Internal GPS Receiver | 12-channel/satellite GPS receiver |
| Input Connector | SMA Female 50 ohm |
| Power | Li-PO, AC, DC |
| Runtime Internal Battery | > 3 hours |
| Recharge Time | < 3 hours |
| PHYSICAL SPECIFICATIONS: | |
| Weight | 5 lbs. |
| Dimensions | 1.5″ H x 7.5″ W x 5″ L (water resistant, high-impact ABS plastic case) |
| OPTIONAL ACCESSORIES: | |
| 12V car adapter, 2.4 GHz Directional Finding Antenna, 5 GHz Directional Finding Antenna | |
| OPTIONAL DIRECTION FINDING ANTENNA: | |
| Frequency | 5150-5350 MHz |
| Gain | 5 dBi |
| VSWR | <2 : 1 |
| Impedence | 50 Ohm nominal |
| Beamwidth | 75 degree vertical, 65 degree horizontal |
| Front-to-Back Ratio | 22 dB or better |
| Material | Powder-coated aluminum, ABS plastic radome |
| Weight | 1 Lb. |
| Connector | SMA attached at rear of antenna |
| Frequency | 2300-2600 MHz |
| Gain | 9 dBi |
| Bandwidth @ 2:1 SWR | 200 MHz or better |
| Impedence | 50 Ohm nominal |
| Beamwidth | 75 degree vertical, 65 degree horizontal |
| Front-to-Back Ratio | 22 dB or better |
| Material | Powder-coated aluminum, ABS plastic radome |
| Weight | 1 Lb. |
| Connector | SMA attached at rear of antenna |
| TABLET SPECIFICATIONS: | Ask your authorized BVS sales agent for the latest specifications |
LTE4G / WiMAX Analyzers
YellowFin Fixed WiMAX
YellowFin LTE 4G
YellowFin Mobile WiMAX
