G8LMW Consulting stock, support and integrate the YellowFin OEM WiMAX Developer Kit
The YellowFin OEM WiMAX Developer Kit allows engineers and installers to optimize existing WiMAX networks for better coverage by including a spectrum analyzer and WiMAX packet demodulation all in one handheld unit.
YellowFin OEM WiMAX Developer Kit
G8LMW Consulting stock, support and integrate the YellowFin OEM WiMAX Developer Kit
The YellowFin OEM WiMAX Developer Kit allows engineers and installers to optimize existing WiMAX networks for better coverage by including a spectrum analyzer and WiMAX packet demodulation all in one handheld unit.
YellowFin™ OEM WiMAX Developer’s Kit sweeps the IEEE 802.16e standard and demodulates RSSI measurements for Cell ID & Segment information, multipath analysis and CINR (Carrier-to-Interference-plus-Noise-Ratios) on a preamble basis. Berkeley’s receiver technology measures RSSI to within +1.5 dB of any nearby WiMAX packet on or off your network.
YellowFin™ OEM module contains (1) Ethernet 10/100 Mbit port and (1) mini USB port for PC connectivity, (1) standard SMA female antenna connection, an internal 12-channel/satellite GPS receiver and necessary DLL software and documentation.
YellowFin™ OEM includes a DLL (Dynamic Link Library) to get any developer up and running with their own custom software development. The YELLOWFIN™-OEM kit includes all the necessary components for creating customizable Mobile WiMAX surveys, interference detection and packet traffic analysis.
| DEMODULATOR SPECIFICATIONS: | |
| Bands Supported |
2.3 – 3.8 GHz
|
| RF Sensitivity (Wide Band) |
-20 to -90 dBm
|
| RSSI (Channel) |
-20 to -80 dBm
|
| Correlated Multipath Measurements |
0 to -10 dBm
|
| CINR |
0 to +20 dB
|
| SPECTRUM ANALYZER SPECIFICATIONS: | |
| Bands Supported |
2.0 – 5.9 GHz (includes 802.11b/a/n/g)
|
| Average Noise Floor (no input) |
< -100 dBm (reference level -70 dBm, resolution bandwidth=50 kHz)
|
| Dynamic Range |
> 40 dB
|
| Level Accuracy |
+ 1.5 dB (25º C)
|
| Max Input (safe) |
+ 0 dB
|
| Max Input (no saturation) |
-20 dB
|
| Reference Level |
-20 to -70 dBm (10 dB steps)
|
| TRIGGERING: | |
| Packet/Interefrence Trigger | Trigger analyzer when input power meets or exceeds threshold (20 MHz span) |
| Trigger Threshold | User settable in dBm (up to 20 dB below current reference power level) |
| Trigger Delay | User settable in mS |
| GENERAL SPECIFICATIONS: | |
| Internal GPS Receiver | 12-channel, 12-satellite GPS receiver |
| Input Connector | SMA Female 50 ohm |
| Power | Included AC to DC transformer |
| PHYSICAL SPECIFICATIONS: | |
| Weight | 2 lbs. |
| Dimensions | 3″ H x 4″ W x 8″ L (water resistant, high-impact ABS plastic case) |
LTE4G / WiMAX Analyzers
YellowFin Fixed WiMAX
YellowFin LTE 4G
YellowFin Mobile WiMAX
